| Pretreatment (3-stage inline washer) | 1: Heated cleaner iron phosphate 2: Rinse (ambient) 3: Heated R/O rinse or seal rinse |
| Drying | Single pass inline convection oven |
| Powder Booth | Wagner reclaim cartridge/cymod |
| Powder Application Equipment | Six Wagner automatics on reciprocators Two manual touch up guns IR part monitor and gun controller |
| Cure Oven | Three pass convection oven |
| Line information | Part size capability ranges from ¼ in × ¼ in to 8ft × 2ft × 6in Line speed is 3 to 8 feet per minute |
| Types of metal coated | Hot and cold rolled steel, aluminum, aluminum alloy, cast aluminum iron, cast iron, brass, stainless, etc. |
Our Facilities
Learn About Our 23,000sqft Automated Powder Coating Facilities
510-foot Conveyorized Automated Operation
(Large Production Runs)
450-foot Conveyorized Automated Operation
(Large Production Runs)
| Pretreatment (Three stage inline washer) | 1: Heated cleaner iron phosphate 2: Rinse (ambient) 3: Heated R/O rinse or seal rinse |
| Drying | Single pass inline convection oven |
| Powder Booth | Wagner reclaim/cymod |
| Powder Application Equipment | Six Wagner automatics on reciprocators and two manual touch up guns IR part monitor and gun controller |
| Cure Oven | Inline single pass convection oven |
| Line information: | Part size capability ranges from ¼ in × ¼ in to 12ft × 2ft × 4ft 6in Line speed is 3 to 8 feet per minute |
| Types of metal coated | Hot and cold rolled steel, aluminum, aluminum alloy, cast aluminum iron, cast iron, brass, stainless, etc. |
Batch Operation
(custom and small run)
| Size capability | 10 × 24 × 7 (L×W×H, feet) |
| Aluminum pretreatment | Mil Standard 81706 Band Mil Standard C 5541 for class A1 and 3. OPL, ROHS, ELV, WEEE compliance certification Clear and gold conversion coating |
| Steel and Iron Pretreatment | Two stage spray wand phosphatizing and degreasing Wash bay size: 25 × 12 (feet) |
| Media blasting (glass and aluminum oxide) | State of the art system with auto reclaim. Booth size: 12 x 21 x 10 (feet) |
| Heat (metal and cast degassing) | Oven #1: 32 × 32 × 18 (L×W×H, inches) Oven #2: 75 × 96 × 87 (L×W×H, inches) Temperature capacity: 850°F |
| Stripping | Thermal, aluminum oxide, media blasting, glass media blasting, chemical |
| Powder Booth (manual batch) | Sizes range from 10 × 24 × 7 (L×W×H, feet) |
| Powder Application Equipment | Wagner |
| Cure Oven (convection) | Oven #1: 20 × 8 × 7 (L×W×H, feet) Oven #2: 24 × 10 × 7 (L×W×H, feet) Temperature capacity: 500°F |